
FOCKE WULF FW190A SQS 50 ARF
The airplane that secured German control over Europe’s skies in the mid part of WWIIrecreated in fine detail as a 50-size balsa airplane model From its entry into battle in 1941, the Focke-Wulf...
Brushless motor tech adds boost for even more speed!
Enjoy the enhanced power and scale looks of the new generation MAD VAN
Enhanced scale features of the American street van styled FAZER Mk2 MAD VAN combine with a 50% increase in maximum speed with the change to brushless motor power in this 1/10 scale VE model. In place of the conventional G14L brushed motor, the new model combines the powerful TORX 10E brushless motor with BRAINZ 10 speed controller to lift the maximum speed from 40km/h to 60km/h. To manage the extra power and RPM, gears have been reinforced and reduction ratio optimized on the FZ02L-BT chassis base, which now incorporates the previously optional aluminum HD center shaft L. In addition to chassis improvements, the body styling has also received a 3-D enhancement with molded resin grille and lights replacing decals, and a roof guard has been added to protect the body from rollovers. With elevated performance and appearance, you can experience the exhilaration of running wild at high speed with the MAD VAN VE.
(Features)
● Pre-assembled chassis is sold as a Readyset including installed R/C system and pistol-grip transmitter. Battery for the chassis and charger are sold separately
● Includes Syncro KT-231P+ pistol-grip transmitter with various custom setting adjustments
● Robust construction of the full-time 4WD FZ02L-BT chassis is tough enough to handle the hard punishment of rough-road bashing
● A belt type battery mount enables compatibility with various battery sizes and shapes
● Full ball bearing specifications improve drive efficiency and durability
● Compatible with a wide range of optional parts for the existing FAZER Mk2 for further tuning and performance improvement
●Includes American-style van body that has been enhanced with an even greater level of scale detail.
●Detailed body with plastic parts.
●Equipped with Front and Rear light buckets compatible with optional No. 97054-4CR LED Light unit which is sold separately.By installing the LED light unit, improves scale realism for body shell.
■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F:250mm/R:250mm
■Tires (F/R) F:φ110×70mm/R:φ110×70mm
■Gear Ratio 11.803:1
■Weight 2180g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E (3652 kv4000)
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller
●Spanner
●Customization decals
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools
FAZER Mk2 sets the standard for Kyosho 1/10 EP car chassis. A bathtub type frame realizes an optimal combination of rigidity with moderate flex and incorporates the proven reliability of shaft-type 4WD together with sealed front and rear gearboxes to handle the punishment of off-road driving.
Long-type upper and lower suspension arms equipped with oil shocks for front and rear provide a sufficient stroke and secure damping force. Ball-connected left-right interchangeable steering knuckles realize smooth operation and crash resistance.
Optional aluminum HD center shaft (No. FAW210) is standard equipment to support the power of brushless motor and realizes smooth rotation.
The TORX 10E brushless motor generates enough power for gentle wheelies with the big body and tires. Sealed motorcase prevents dirt and dust from getting into the motor and gearbox.
Includes BRAINZ 10 speed controller equipped with cooling fan, for brushless motors. Able to be programmed for specific purposes. Waterproofing allows you to drive even in the rain or through small puddles.
Gearbox incorporates high-strength sintered metal gears. In addition to new material, the final gear ratio has been changed to low gear to fully utilize the power of the brushless motor. The machined steel pinion gear has also been strengthened.
Large diameter tires produce high grip on any road surface. The kit comes with pre-glued wheels so you can hit the ground running. To match the new-look chassis, wheels have been changed to white and match nicely with the body.
VE model features a wheelie bar to prevent flipping over when doing wheelies. With the power of the brushless motor, the dynamic acceleration lifts the front wheels and the chassis runs on its rear wheels (wheelie).
Polycarbonate body is painted bright red and white. Separate molded parts such as the bumper, grille and side mirrors enhance the scale feel of this 1970’s & 80’s American van motif. A roof guard is also installed.Extra decal sheet included to customize body.
16 other products in the same category:
The airplane that secured German control over Europe’s skies in the mid part of WWIIrecreated in fine detail as a 50-size balsa airplane model From its entry into battle in 1941, the Focke-Wulf...
Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!From beginner to race winner, this machine delivers smooth performance every time. User-friendly with mild control response,...
Experience the full force of 60km/h speed as soon as you open the box!Serious offshore racer features auto-recovery from capsize function Hit maximum speed of approximately 60km/h with 14.8V 4-cell...
Unique visuals of this American full-size vandeliver excellent backroad driving performance Designed in the image of an American full-size van, Kyosho’s fun MAD VAN model combines retro body...
Real racing buggy performance sits on the palm of your hand.The perfect first (or even second) R/C car! Simply add eight AAA-size alkaline batteries to this Readyset and the MINI-Z Buggy brings...
Make your R/C debut something to remember with this rough and ready monster truckOnly requires four AA-size batteries!Nothing stands in the way of the Monster Tracker as it clears jumps and gaps in...
The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler....
Kyosho Inferno MP10T 1:8 4WD RC Nitro Truggy Kit
Kyosho FAZER MK2 Chassis Kit w/Mercedes AMG GT3 Clear Bodyshell
Experience the excitement of realistic water bike action and a new style of marine fun! Kyosho brings the fun back to the water with the revival of the artfully designed Wave Chopper, first...
20 years ago the MINI-Z Racer series started a revolution in small size R/C cars. Since the first MR-01 on-road chassis, the MINI-Z has been adapted to other car genres such as drifting machines,...
RC Surfer returns for everyone to enjoy again Kyosho’s 4th release of the RC Surfer that amazed the world with its innovative form and function rides the waves again. Reinforced stainless shaft...
Mini-Z MA030 EVO Chassis Set (AWD - 8500KV)
Mighty belt-tracked vehicle powers over sand, dirt and snow!User-friendly Readyset with 2.4GHz R/C system also provides blade arm control! Powered by two independent side-by-side motors, the...
Kyosho USA-1 Nitro 1:8 RC Nitro 4WD Readyset w/KE25SP2 The original Kyosho Nitro USA-1 set the standard for RC Monster Truck power and performance when it was released in 1990. 30 years later, the...
MOTO HANGING ON RACER SUZUKI RGV 1992 KIT Fun to build, pleasing to display, amazing to drive!The one and only electric R/C bike with hanging on rider figure than leans through corners Since it’s...